Pусский 
Super Precision Dicing Saw DS623
DS623 super precision dicing machine uses the imported high-power DC spindle and performance is more excellent. The spindle has self-locking function and makes it much easier to replace the blade. DS623 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina, quartz and sapphire.
Features
With dual lens and higher alignment accuracy
Broken Blade Detector (BBD)
Grinding machine function
Automatic edge-searching function
Data scanning function
Product Parameters
Specifications | ||
Configuration and performance | Workpiece size | Φ160mm | ≤150mm x 150mm |
Groove depth | ≤4mm or customize | |
Table flatness | ±0.005mm/150mm | |
Alignment system | 70x straight light + ring light (240x optional) | |
Spindle | Revolution speed range | 10000~50000 rpm |
Output power | 1.5kW (2.4kW optional) | |
X axis | Drive mode | Servo motor |
Max. stroke | 240mm | |
Stroke resolution | 0.001mm | |
Feed speed range | 0.1～500mm/s | |
Y axis | Drive mode | Step motor + grating closed-loop control system |
Max. stroke | 170mm | |
Stroke resolution | 0.0001mm | |
Single-step positioning accuracy | ≤0.002mm/5mm | |
Index positioning accuracy | ≤0.004mm/170mm | |
Z axis | Drive mode | Step motor |
Max. stroke | 30mm | |
Stroke resolution | 0.001mm | |
Repeatability accuracy | 0.002mm | |
Θ axis | Drive mode | Imported DD motor |
Max. rotating angle | 380° | |
Angle resolution | 0.0002° | |
Basic specification | Power supply | Single phase, AC220V±10% |
Power consumption | 0.8kW (processing) | |
0.7kW (warming up) | ||
Compressed air | Pressure: 0.55~0.8Mpa; average flow rate: 450L/min | |
Cleaning water | Pressure: 0.2~0.4Mpa; flow rate: 3.5L/min | |
Cooling water | Pressure: 0.2~0.4Mpa; flow rate: 1.5L/min | |
Exhaust air rate | 1.5m3/min (ANR) | |
Overall dimensions W×D×H | 580mm×850mm×1680mm | |
Weight | 500kg | |
Production process
Environmental Conditions |
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1℃ of the set value (Set value should be between 20℃ - 25℃), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2℃ above room temperature (fluctuations within ±1℃). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
Certificate
Company profile
WTsensor is committed to providing you with optimal solutions for industrial products and industrial equipment!
Contact us
Nanjing Wotian Technology Co.,Ltd.
Website: www.wtsensor.com
Add: 5 Wenying Road, Binjiang Development Zone, Nanjing, 211161, China
Email: dr@wtsensor.com
Company advantage
Mass production
We have one production center in Nanjing and one production center in Anshan with 20,000㎡plant and 170 units of production equipments. The main annual capacity of sensors is about 2,000,000 pieces.
Imported equipments
We imported 20 sets of pressure controller and 150 units of testing ovens to our production line.
Informatization management
We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.
Comprehensive testing
We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.
